+256 791 224 557 info@gng-skills.com

G&G Skills – Training program for Geologists

Training Duration Description
Petroleum Geology 5 Days (Basic) This course gives the fundamentals of geology to manage petroleum reservoirs.
Petroleum Systems 5 Days (Basic) This course gives the knowledge to evaluate the sedimentary basin hydrocarbon potential.
Structural Geology 5 Days (Basic) This course provides the knowledge to characterize the structural style of a sedimentary basin and structral traps.
Geology of Clastic Reservoirs 5 Days (Basic) This course gives the fundamental of clastic depositional environments and clastic reservoir properties.
Geology of Carbonate Reservoirs 5 Days (Basic) This course gives the fundamentals of carbonate environments and carbonate reservoir properties.
Reservoir Geology 5 Days (Basic) This course gives the fundamentals of reservoir geology including; (reservoir characterization, petrophysics, facies analysis, rock typing).
Resources and Reserves Evaluation 2 Days (Basic) This course gives the definition and the method to calculate resources and reserves.
Well Logging & Log Interpretation 5 Days (Advanced) This course provides an overview of main logging tools and fundamental of well log interpretation for reservoir identification and characterisation.
Biostratigraphy 5 Days (Advanced) This course provides practical knowledge in biostratigraphy, including major fossils groups, processing techniques, markers identification, biostratigraphic charts.
Wellsite Geology 5 Days (Advanced) This course gives the knowledge to monitor and use geological data acquired while drilling in order to characterize geological formations and reservoirs.
Sequence Stratigraphy 5 Days (Advanced) This course provides a practical understanding of the concepts of sedimentology and sequence stratigraphy.
Fault seal Analysis 5 Days (Advanced) This course gives concepts and methods in trap and seal fault analysis.
Core Analysis 5 Days (Advanced) This course provides a practical understanding of methods for core analysis for describing and evaluating reservoir rock properties.
Quantitative Well Log Analysis 5 Days (Advanced) This course provides the knowledge to perform a quantitative log interpretation (porosity, permeability, net sand, net reservoir and net pay characteristics).
Facies Analysis & Rock Typing 5 Days (Advanced) This course gives the fundamentals of rock types for reservoir modelling, electrofacies analysis, integration of core description.
Seismic Interpretation 5 Days (Advanced) Basics of seismic interpretation including : seismic signal, initiation to seismic acquisition and processing, well seismic tie, structural and stratigraphic intepretation, seismic attribute and time depth conversion.
Basin Modeling 5 Days (Advanced) This course provides an in depth and practical understanding of thermal basin modeling in a comprehensive workflow, including modeling of oil maturation and hydrocarbon migration, leading to the assesment of hydrocarbon potential of an exploration block.
Play Assessment & Prospect Generation 5 Days (Advanced) This course provides a practical understanding of the technical evaluation of an exploration asset.

G&G Skills – Training program for Geophysicists

Training Duration Description
Geodesy and Positioning 3 Days (Basic) Initiation to geodesy and positioning.
Seismic Acquisition and Processing 5 Days (Basic) Basics of seismic acquisition and processing.
Seismic Interpretation 5 Days (Basic) Basics of seismic interpretation including : seismic signal, initiation to seismic acquisition and processing, well seismic tie, structural and stratigraphic interpretation, seismic attribute and time depth conversion.
Borehole Seismic 5 Days (Basic) This course provides theoretical and practical knowledge to supervise acquisition and processing of borehole seismic (VSP/OSP/Walkaway).
Non-Seismic Geophysical Methods 5 Days (Basic) Basics of non-seismic geophysical methods as gravity, magnetic, electrical and electro-magnetic (EM) methods.
Petrel Geophysics (including Seismic Well Tie) 5 Days (Basic) Basic of Petrel Geophysics : Project setup, data preparation, seismic visualization, well seismic tie, horizon and fault Interpretation and introduction of time depth conversion.
Resources and Reserves Evaluation 2 Days (Basic) This course gives the definition and the method to calculate resources and reserves.
Sedimentology & Seismic Sequence Stratigraphy 5 Days (Advanced) This course provides a practical understanding of the concepts of sedimentology and seismic sequence stratigraphy.
Structural Geology for seismic intepreter 5 Days (Advanced) This course provides knowledge to characterize the structural style of a sedimentary basin and structral traps.
Advanced Seismic Acquisition 5 Days (Advanced) This course gives the theoretical and practical knowledge to design and to supervise seismic acquisition.
Advanced Seismic Processing and Depth Imaging 5 Days (Advanced) This course gives the theoretical and practical knowledge to supervise seismic processing.
Fault Seal Analysis 5 Days (Advanced) This course gives concepts and methods in trap and seal fault analysis.
Petrel Time Depth Conversion 5 Days (Advanced) This course provides theoretical and practical knowledge to perform a time depth conversion with Petrel.
Petrel Seismic Attributes 3 Days (Advanced) This course provides the theory and practical workflows needed for seismic attributes interpretation with Petrel.
Play Assessment & Prospect Generation 5 Days (Advanced) This course provides a practical understanding of the technical evaluation of an exploration asset.
Seismic Reservoir Characterization (including AVO & Inversion) 5 Days (Advanced) This course provides knowledge of seismic reservoir characterization focusing on amplitudes, seismic attributes, Inversion and AVO.

G&G Skills – Training program for Reservoir Engineers

Training Duration Description
Introduction to Reservoir Engineering 5 Days (Basic) This course gives reservoir engineering basics : reservoir formation properties, fluid contacts and pressure gradients, PVT, well testing, reservoir drive.
PVT properties of Reservoir Fluids 5 Days (Basic) This course gives the methods for obtaining values of reservoir fluid properties (Pressure-Volume-Temperature).
Drilling & Completion - Wellbore Interface & Well Productivity 5 Days (Basic) This course provides a comprehensive and practical understanding of fundamentals of drilling, completion, wellbore interface and well productivity applied for reservoir engineers.
Well Testing & Well Test Analysis 5 Days (Basic) This course provides a comprehensive and practical understanding about performing set-up, design and analysis of well tests.
Drive mechanism - Enhanced Oil Recovery Processes 10 Days (Basic) This course gives a comprehensive understanding of reservoir drive mechanism and Enhanced Oil Recovery (EOR) methods.
Dynamic Reservoir Simulation 5 Days (Basics) This course provides the basic concepts in Reservoir Engineering required to perform reservoir fluid flow calculation.
Resources and Reserves Evaluation 2 Days (Basic) This course gives the definition and the method to calculate resources and reserves.
Advanced Dynamic Reservoir Simulation 5 Days (Advanced) This course covers advanced dynamic reservoir simulation including gridding & upscaling, wells representation, compositional simulation and assisted history matching.
Advanced Well Test Analysis 5 Days (Advanced) This course gives the practical application of modern advanced techniques in well test analysis.
PVT Modeling 5 Days (Advanced) This course provides an extensive and practical understanding of advanced PVT modeling.
Advanced Enhanced Oil Recovery 5 Days (Advanced) This course gives an advanced understanding of Enhanced Oil Recovery methods (Chemical, Miscible, Thermal).
Decline Curves Analysis 3 Days (Advanced) This course gives the knowledge for analyzing decline curve to make production forecast and reserve estimation.

G&G Skills – Training program for Drillers

Training Duration Description
Fundamentals of Drilling and Completion 5 Days (Basic) This course provides a basic understanding of Drilling and Completion as well as various pressures within in the well.
Well Servicing and Workover 5 Days (Basic) This course provides the knowledge and skills for implementing and to supervise well servicing and workover.
Well Test Operation 5 Days (Basic) This course gives the knowledge and skills for implementing well tests.
Geomechanics for Drilling Engineers 5 Days (Basic) This course will give the fundamentals of Geomechanics and the the role of Geomechanics plays in well programming and operation.
HSE in Drilling Operations 5 Days (Basic) This course covers the risks associated to drilling operations and reinforces the HSE culture.
Directional & Horizontal Drilling 5 Days (Advanced) This course provides a compehensive knwoledge to prepare efficiently and succeed in drilling a directional well.
Well Architecture & Equipment 5 Days (Advanced) This course provides the methodology for designing a casing program.
Bit & Drill String & Fishing while Drilling 5 Days (Advanced) This course provides knowledge of drilling bit, drill string and fishing techniques with its specific equipment.
Rig, BOP & Well Control Equipment 5 Days (Advanced) This course provides knowledge of rigs, BOP and well control equipment.
Wellhead Operations & Maintenance 5 Days (Advanced) This course gives the practical knowledge of the different types and functions of wellheads and their Operations & Maintenance.
Drilling Fluids 5 Days (Advanced) This course provides a comprehensive understanding of drilling fluids characteristics and functions.
Cementing Practices 5 Days (Advanced) This course provides knowledges and skills required to design a cementing program.
Data Acquisition during Drilling Operations 5 Days (Advanced) This course provides practical knwoledge of openhole logging, mud logging and coring while drilling.
Well Performance 5 Days (Advanced) This course provides a comprehensive understanding of well optimisation.
Sand Control 5 Days (Advanced) The course discusses concepts related to the selection of sand control method and treatment design.
HPHT Drillling Design adn Operation 5 Days (Advanced) This course has been designed to help drilling engineering to understand the technologies, challenges, processes, and equipment used to drill High Pressure and High Temperature Oil and Gas wells.
IWCF Surface Well Control Certification (Supervisor) 10 Days (Advanced) This course has been designed to fulfill the requirements for the international Well Control Forum Surface Well Control Qualification.

G&G Skills – Training program for Corporate Social Responsibility (CSR)

Training Duration Description
International norms and their application 5 Days (Advanced) This course gives an overview of the different international norms and how to integrate them into the action plan.
The different compensations within the frame of Resettlement Action Plans 5 Days (Advanced) This course explains what the different compensations have to be implemented when doing a Resettlement Action Plan and how to implement them.
ESIA: methodology and action plan 5 Days (Advanced) This course explains how to design and implement an ESIA (Environmental and Social Impact Assessment).
Territorial approach of the CSR 5 Days (Advanced) This course explains how to build consistent CSR policies and programs.

Our Location

P.O. Box 36485, Canon Road, Ntinda Buye, Kampala Uganda

info@gng-skills.com

www.gng-skills.com

+256 791 224557

Newsletter

Subscribe to our latest news to be updated,
we promise not to spam!